![]() |
|
Cementing units, or CU, are designed for pumping various fluids for cementing when drilling or overhauling, as well as during sundry flushing and overflushing operations in oil and gas wells.
These units are designed for use in mild and cold climates.
CEMENTING UNIT SPECIFICATIONS: BASIC CONFIGURATION |
||||
Pump unit |
Triplex-plunger pump |
Piston pump |
||
Pump model |
ZPN-32M |
SIN-32 |
НПЦ-32 |
НЦ-320, ЦН-26-32 |
Useful power, kW |
110 |
132 |
105 |
100 |
Plunger/piston stroke, mm |
160 |
130 |
250 |
250 |
Maximum pressure, MPa |
40 |
32 to 50 |
32 |
40 |
Maximum feed, dm3/s |
25 |
16 to 25 |
26 |
26 |
Water supply unit |
Yes/No |
|||
Measuring tank capacity, m3 |
5 to 6 |
|||
Cementing tank capacity, m3 |
0,25 |
|||
Manifold, nominal diameter, mm - receiving line of the cementing pump and the centrifugal pump |
|
|||
Water supply unit |
||||
Auxiliary engine |
Diesel/gasoline |
|||
Water pump |
ЦНС 38-152 centrifugal pump |
|||
Rated flow, m3/s |
10,5 |
|||
Discharge pressure, MPa |
1,54 |
*Technical specifications are presented on this page for reference only, as the parameters and other operational indicators depend on the vehicle configuration of choice.