![]() |
|
Drilling rig is designed for structural and exploratory drilling of oil-and-gas wells, hydro-geological and operational rotary drilling of water wells in soft- and medium-hardness rocks with direct wash/backwash of the bottom; such operations can be done in macro-climatic regions of mild and cold climate at ambient air temperatures of -40°С to +40°С.
DRILL SPECIFICATIONS: BASIC CONFIGURATION |
|
Permissible hook load, kN (tf) |
196 (20) |
Maximum tested hook load, kN (tf) |
245 (25) |
Conditional depth of pipe-drilling |
Ø 60.3 mm, 63.5 mm, - 700 - 600 m Ø 73 mm, 89 mm - 500 m - 300 m Ø 150 mm (internal) for backwash - 250 m |
Tower |
Vertical double-section tower with an open front face and a folding top section / inclined double-section tower with a folding top section |
Tower height, m |
18,6 |
Rotary table to crown block distance, m |
15.5 to 16.5 |
Monkey-board magazine capacity at a drill-pipe stand length of 12 m, m: |
1,000 |
Drill-pipe stand length, m |
9 to 12 |
Setback, permissible load, kN (tf) |
196 (20) |
Hoist-system tooling |
2х3 |
Max. hoist-rope diameter, mm |
18 |
Лебедка |
Double-drum |
Tractive force of the drilling drum, kN (tf) |
51 (5,2) |
Hoist-block lifting speed, m/s |
0.2 to 1.63 |
Tractive force of the auxiliary drum, kN (tf) |
24,5(2,5) |
Auxiliary-drum lifting speed, m/s |
0.16 to 1.6 |
NB-50 drill piston pump: |
|
Generator: |
|
Swivel: - permissible load, kN (tf) |
196 (20) |
Drilling rotor: - bore, mm |
410 |
Maximum lifting-unit weight during transport, kg |
Up to 20,759 |
ADDITIONAL OPTIONS |
|
|
*Technical specifications are presented on this page for reference only, as the parameters and other operational indicators depend on the vehicle configuration of choice.