![]() |
|
A road train for pipe consists of a tractor and a pole trailer.
Pipe tractors are designed for transporting pipes along hard-paved roads, off hard-paved roads, along haul roads; they can also transport pipe stalks (segments) along general roads as well as highways and temporary roads whose condition allows for unhindered motion of full-weight road trains.
Pole trailers for pipes are designed for transporting pipes along hard-paved roads, off hard-paved roads, along haul roads; they can also be used for transporting pipe stalks (segments) along pipelines under construction.
Long logs are placed between the bolsters of the tractor and the pole trailer for transport.
For transport, the pole trailer can be placed upon the tractor platform.
Operating conditions: Operating ambient air temperatures might range from -45˚С to +40˚С if the unit is stored outside a garage.
PIPE TRACTOR SPECIFICATIONS: BASIC CONFIGURATION |
|
Loading the pole trailer onto the tractor |
Self-loading / no self-loading |
Loading device |
None/towing winch with a hydraulic drive (for loading pipes onto the road train), with self-loading |
Diameter of transportable pipes |
530 to 1,420 |
Length of transportable pipes, m |
Up to 16 (up to 36 stalks) |
Transportable weight, kg |
7,000 to 20,000 |
Bolsters |
Welded design with movable stands on the bolster base; stands are fixed onto the base by means of pins / with folding stands and pulling ropes / Welded design using standard profiles and sheet metal. Bolt-connected. |
Towing crossbar |
Loop hook / Gapless linking yoke |
Payload loading skid |
Yes/No |
ADDITIONAL OPTIONS |
|
|
PIPE POLE TRAILER SPECIFICATIONS: BASIC CONFIGURATION |
|
Loading device |
None/towing winch with a hydraulic drive (for loading pipes onto the road train), with self-loading |
Diameter of transportable pipes |
530 to 1,420 |
Length of transportable pipes, m |
Up to 12 (up to 36 stalks) |
Load capacity, kg |
7,000 to 20,000 |
Number of axles / wheels |
1/2; 2 / 4 |
Drawbar |
Non-removable, round cross-section / removable, circular-section / roped |
Bolsters |
Welded design with movable stands on the bolster base; stands are fixed onto the base by means of pins / with folding stands and pulling ropes / Welded design using standard profiles and sheet metal. Bolt-connected |
Suspension |
Equalizing-beam, leaf-spring suspension with torque rods / leaf-spring suspension |
Brakes |
Working brakes: double pneumatic breaks, drum-type anti-lock brakes for all wheels Parking brakes: mechanical manual brakes for the working brakes of the rear-axle wheels. |
Packaging includes |
Wheel chocks, cables, a set of traction ropes, external marker lamps. |
ADDITIONAL OPTIONS |
|
|
*Technical specifications are presented on this page for reference only, as the parameters and other operational indicators depend on the vehicle configuration of choice.