|
Watering equipment
![]() |
|
Watering equipment is designed for washing hard-paved roads, traffic barriers, road signs, and other road components. Watering equipment is mounted on truck chassis. Such equipment consists of: a central valve, a water pump, a tank, and a strainer.
Water flows from the tank via the central valve to the strainer, then to a centrifugal pump. Exposed to high pressure, it goes towards faucets and nozzles. As the pipeline has additional lateral outlets, one can connect fire hoses to it.
There are a main valve, a sump, and various filters inside the tank. In order to prevent rocking the liquid when the vehicle is on the move, the tank also contains baffle plates. The central valve controls the flow of water towards the pump. The valve on top of the tank is used for filling it with a liquid.
WASHING EQUIPMENT SPECIFICATIONS: BASIC CONFIGURATION
|
||||
Implementation |
Dump-truck body / chassis |
|||
Tank |
Steel tank of a suitcase / elliptical / circular-section, with internal partitions |
|||
Legs |
With or without retractable legs |
|||
НЦ60/125 water pump |
115 m head, 60 m3/h (16.7 l/s) feed |
|||
Water nozzles |
2 in front and 1 on the frame |
|||
Tank capacity, m3 |
3 - 12 |
|||
Road surface washing width, m |
Up to 8.5 |
|||
Watering width, m |
2 to 20 |
|||
ADDITIONAL OPTIONS |
||||
|
*Technical specifications are presented on this page for reference only, as the parameters and other operational indicators depend on the vehicle configuration of choice.
|